Home > Product Range > Alloy Specifications
8000 series

Alloy 8011

Alternative Designations: Garmco produces this alloy to Australian Standards.
Chemical Composition: In percent maximum unless indicated as a range or as a minimum.

Chemical Composition: In In present maximum unless indicated as a range or as a minimum
8011 Si Fe Cu Mn Mg Cr Zn Ti Each Total Aluminium
(% max) 0.50-0.9 0.6-1.0 0.10 0.05 0.05 0.05 0.10 0.08 0.05 0.15 Remainder
Typical Uses: PP Caps; House Hold; semi-rigid containers.
Availability: Coiled sheet only. Hot washed coil (with minimum residual oil) is available for 1.00 mm gauge and below only.
Tempers: O, H14, H16 and H18. H12 and special tempers are subject to inquiry.
Mechanical Properties (Australian Standards)

Temper Gauge, Tensile Strength, MPa Elongation %
  mm Minimum Maximum (50 mm L)
O 0.30-0.80
0.81-1.30
1.31-3.00
75 105 20
25
30
H12 Up to 0.50
0.51 to 0.80
0.81 to 1.30
1.31 to 3.00
100 135 3
4
6
8
H14 Up to 0.50
0.51 to 0.80
0.81 to 1.30
1.31 to 2.50
115 150 2
3
4
5
H16 Up to 0.50
0.51 to 0.80
0.81 to 1.30
1.31 to 2.00
140 170 1
2
3
4
H18 Up to 0.50
0.51 to 0.80
0.81 to 1.30
1.31 to 2.00
160 - 1
2
3
4
Thickness (mm) O" and H12 0.30~3.00 mm
H14 0.30~2.50 mm
H16 0.30~2.00 mm
H18 0.30~2.00 mm

Thicknesses outside these limits are subject to inquiry.

Width: 870 - 1560 mm. (Narrower widths are subject to inquiry).
Arbors: 300, 400, 508, 600 mm.
Annealing: 340C± 5C, until all parts have reached the annealing temperature. Different temperatures and long soak times are often necessary to volatilize the foil rolling coolant present on the surface.
Weight Calculation: kilogram per square meter = 2.71x thickness in mm.

Alloy 8079AA

Coiled sheets of this alloy are for re-rolling to foil products. Garmco produces this alloy to Aluminium Association specifications.

Typical Uses: Household foil; semi-rigid containers.

Availability:

Tempers: To be agreed with customer. This may be in terms of tensile property limits or on intermediate anneal point.
Thickness: 0.35 - 3.20 mm. (Thickness outside these limits are subject to inquiry).
Width: 800 - 1560 mm. (Wider and narrower widths are subject to inquiry).
Form: Coil
Arbors: 250, 300, 400, 508, 600 mm

Annealing: 340C + 5C until all parts have reached the annealing temperature. Different temperatures and long soak times are often necessary to volatilize the foil rolling coolant present on the surface.
Weight Per Square Meter in Kilograms: 2.73 x thickness in mm.

Alloy 8150

Coiled sheets of this alloy are for re-rolling to foil products. Garmco produces this alloy to Aluminium Association specifications.

Chemical Composition: In In present maximum unless indicated as a range or as a minimum
8150 Si Fe Mn Ti Others Total Aluminium
(% max) 0.30 max. 0.9-1.3 0.20-0.7 0.05 max. 0.05 max. 0.15 max. remainder

Typical Uses: Household foil; semi-rigid containers.

Availability:

Tempers: To be agreed with customer. This may be in terms of tensile property limits or on intermediate anneal point.
Thickness: 0.35 - 3.20 mm. (Thickness outside these limits are subject to inquiry).
Width: 800 - 1560 mm. (Wider and narrower widths are subject to inquiry).
Form: Coil
Arbors: 250, 300, 400, 508, 600 mm
Annealing: 340C + 5C until all parts have reached the annealing temperature. Different temperatures and long soak times are often necessary to volatilize the foil rolling coolant present on the surface.
Weight Per Square Meter in Kilograms: 2.73 x thickness in mm.






Latest News
10 December 2017
GARMCO's Go Green Drive

 ... >>
03 December 2017
AmCham Bahrain tours GARMCO plant

 ... >>
15 October 2017
GARMCO Employees take place in Bahrain Cancer Society Walkathon

 ... >>
Global Presence
World continents
Garmco USA
360 West Plant Street, Suite 203,
Winter Garden, FL 34787, USA.
  +972-762-8262      
Contact: Jake McGlothlin
E-mail: Jmcglothlin@garmcousa.com
Thailand
(Office/Factory) 999/84 Moo 20, Soi Boonmeesab 4,
Bangplee-Tamru Rd., T. Bangpleeyai, A. Bangplee,
Samutprakarn 10540, Thailand
  +66 2174 5171/2     +66 2174 5173
Contact: Tan Chia Chong
E-mail: chiachong.tan@garmco.com
Vietnam
(Office) Room E43 – Floor 4, FOSCO building,
40 Ba Huyen Thanh Quan street, Ward 6,
District 3, Ho Chi Minh City, Vietnam
(Factory) Rental Factory 1-1,2, Road N3-2,
Long Duc IP, Long Duc ward, Long Thanh district,
Dong Nai province, Vietnam
 (+848) 3930 6065      (+848) 3930 7226

E-mail: hcmc@garmco.com
Singapore
(Office / Factory) No. 2 Tuas Basin Link,
638756 Singapore
(Factory) No. 4 Tuas Avenue 8,
639219 Singapore
  +65 6862 1011     +65 6862 5900
Middle East Sales:
North Sitra Industrial Area, PO Box 20725,
Manama, Kingdom of Bahrain
 +973 17731000 Ext.3311     +973  17730542
Contact: Salah Ebrahim Al-Araifi
E-mail:salah.alaraifi@garmco.com
Europe

  +973 17731000 Ext.3355
  +973  17739855
Direct : +973 17734655 

Contact: Mohamed Yusuf Al-Rafaei
E-mail: mohamed.alrafaei@garmco.com
Australia
268-280 Greens Road, Dandenong South,
Victoria 3175,  Australia
  +61 3 9767 3000     +61 3 9767 3003
Contact: Lip Loh
E-mail: lip.loh@garmco.com.au
 

About Us

Global Presence

Product Range

QHSE & BCIS

CSR

Media Centre